CCNA Training - CCNP Training Certification Exam Q&A-24
CCENT Training Certification :
Host A and Host B are in VLAN 10; Host C
and Host D are in VLAN 20. Assuming these hosts are on the same subnet,
describe briefly which hosts can ping each other, and which ones can't.
Answer: Hosts in the same VLAN will be able to ping each other, but by
default, hosts in different VLANs will not be able to ping each other
- even if they're in the same subnet.
CCNA Training Certification :
Identify the true statements.
A. Full routing tables are exchanged when distance vector protocols are used.
B. When distance vector protocols are in use, only changes to the network are advertised.
C. Full routing tables are exchanged when link state protocols are used.
D. When link state protocols are in use, only changes to the network are advertised.
Answers: A, D.
A. Full routing tables are exchanged when distance vector protocols are used.
B. When distance vector protocols are in use, only changes to the network are advertised.
C. Full routing tables are exchanged when link state protocols are used.
D. When link state protocols are in use, only changes to the network are advertised.
Answers: A, D.
CCNP Training Certification / BSCI Exam :
At what point(s) do BGP peers exchange
full updates?
A. Every 30 seconds.
B. Every 90 minutes.
C. Immediately after the adjacency is formed.
D. Upon a change in the network topology.
Answer: C. After that point, only changes themselves are advertised.
A. Every 30 seconds.
B. Every 90 minutes.
C. Immediately after the adjacency is formed.
D. Upon a change in the network topology.
Answer: C. After that point, only changes themselves are advertised.
CCNP Training Certification
/ BCMSN Exam
:
You want to apply port security
to a switch port. No other configuration has been added. The
switch is a 2950. What do you first have to do?
A. Make the port an access port.
B. Nothing.
C. Make the port trunk unconditionally.
D. Enable dot1x on both the port and the host.
Answer: A. The port will be running in dynamic desirable mode, and it must be made an access port before configuring port security. Otherwise you'll see the following error:
SW1(config)#int fast 0/5
SW1(config-if)#switchport port-security
Command rejected: Fa0/5 is not an access port.
A. Make the port an access port.
B. Nothing.
C. Make the port trunk unconditionally.
D. Enable dot1x on both the port and the host.
Answer: A. The port will be running in dynamic desirable mode, and it must be made an access port before configuring port security. Otherwise you'll see the following error:
SW1(config)#int fast 0/5
SW1(config-if)#switchport port-security
Command rejected: Fa0/5 is not an access port.
CCNP Training Certification / ISCW Exam :
Which of the following possible
points of network vulnerability are enabled by default?
A. NTP
B. TCP / UDP Small Servers
C. BOOTP Server
D. CDP
Answers: C, D. You can turn BOOTP server off with the no ip bootp server command, and you can disable CDP either globally or on a per-interface basis.
A. NTP
B. TCP / UDP Small Servers
C. BOOTP Server
D. CDP
Answers: C, D. You can turn BOOTP server off with the no ip bootp server command, and you can disable CDP either globally or on a per-interface basis.
CCNP Training Certification / ONT Exam :
Short answer: The term "RSVP"
is associated with what QoS model?
Answer: The Resource Reservation Protocol (RSVP) is used by Integrated Services (IntServ).
Answer: The Resource Reservation Protocol (RSVP) is used by Integrated Services (IntServ).
CCNAGURU.com
Finding out for real updated CCNA, CCNP Exam Questions it can help for your success to get CCNA Certification or CCNP Certification in a little time, for your success!!!
Del.icio.us |
Netscape |
Reddit |
|
Technorati |
Blinklist |
Tailrank |
Furl |
ma.gnolia |
Newsvine |
My Web Yahoo! |
|