CCENT Training - CCNA Training - CCNP Training Certification Exam Q&A-35
CCENT Training Certification :
You're connecting a laptop
to the Console port on a Cisco switch. What kind of cable do you need?
A. straight-through
B. crossover
C. rollover
D. CAT5
A. straight-through
B. crossover
C. rollover
D. CAT5
Answer: D. You need
a rollover cable to connect your laptop to a switch or router's CON port.
CCNA Training Certification :
Identify the true statements
regarding CHAP.
A. CHAP requires the password to be the same for both parties.
B. CHAP allows two routers to use different passwords for authentication.
C. CHAP works only with HDLC.
D. CHAP works only with PPP.
E. CHAP works with both HDLC and PPP.
F. CHAP works with neither HDLC nor PPP.
Answers: A, D. The Challenge Authentication Protocol (CHAP) requires both devices to use the same password, and CHAP runs on PPP but not HDLC.
A. CHAP requires the password to be the same for both parties.
B. CHAP allows two routers to use different passwords for authentication.
C. CHAP works only with HDLC.
D. CHAP works only with PPP.
E. CHAP works with both HDLC and PPP.
F. CHAP works with neither HDLC nor PPP.
Answers: A, D. The Challenge Authentication Protocol (CHAP) requires both devices to use the same password, and CHAP runs on PPP but not HDLC.
CCNP Training Certification / BSCI Exam :
In the output of "show ip
bgp
summary", you see a peer state listed as "Idle". Identify
the most accurate statement. What's the most likely reason?
A. The peer relationship is up, but it's not in use at the moment.
B. The local router has no idea how to reach the remote router's IP address.
C. The local router has sent an Open packet to the potential neighbor, but has received no response.
D. The peer relationship has been terminated by the remote router.
Answer: B. The most likely cause of an "Idle" peer state is that the local router has no idea how to get to the neighbor's IP address.
A. The peer relationship is up, but it's not in use at the moment.
B. The local router has no idea how to reach the remote router's IP address.
C. The local router has sent an Open packet to the potential neighbor, but has received no response.
D. The peer relationship has been terminated by the remote router.
Answer: B. The most likely cause of an "Idle" peer state is that the local router has no idea how to get to the neighbor's IP address.
CCNP Training Certification
/ BCMSN Exam
:
Fill in the blank: The
full command to disable a switchport's
ability to transmit DTP frames is ____________.
Answer: switchport nonegotiate.
Answer: switchport nonegotiate.
CCNP Training Certification / ISCW Exam :
Which of the following is
NOT a factor considered by a Cisco
firewall in allowing or disallowing UDP
packets?
A. Source IP address
B. Destination IP address
C. ACK number
D. Source port number
E. Destination port number
Answer: C. UDP packets do not have ACK numbers.
A. Source IP address
B. Destination IP address
C. ACK number
D. Source port number
E. Destination port number
Answer: C. UDP packets do not have ACK numbers.
CCNP Training Certification / ONT Exam :
When using AutoQoS,
what CoS
value is assigned to the traffic class "scavenger"?
A. 0
B. 1
C. 2
D. 3
Answer: B. Additionally, the DSCP value is CS1.
A. 0
B. 1
C. 2
D. 3
Answer: B. Additionally, the DSCP value is CS1.
CCNAGURU.com
Finding out for real updated CCNA, CCNP Exam Questions it can help for your success to get CCNA Certification or CCNP Certification in a little time, for your success!!!
Del.icio.us |
Netscape |
Reddit |
|
Technorati |
Blinklist |
Tailrank |
Furl |
ma.gnolia |
Newsvine |
My Web Yahoo! |
|